I’ve used rhinestone in the past with my Pazzles software so have lots of stones and transfer sheets laying around.
I thought I would have a go at making some designs in Inkscape and converting them in Canvas for the ScanNCut.
I’ve only tried two so far but it worked. I used Pazzles rubber stamp material as my cutting medium, I cut the design with the ScanNCut and then stuck it onto chipboard to make a template.
All I had to do then was pour my rhinestones onto my template and brush them into the holes it worked a treat.
I used a clear transfer sheet to rub over the template to pick up the stones and they are now ready to iron onto a project.
I could only find one of my daughters old black tshirts so I used that to iron the butterfly design onto.
Here is a card I made with the flower.
I posted a video recently giving ideas I had planned for future videos, I’ve had lots of feedback saying you are looking forward to them and also several suggestions from you asking for flourishes and doilies.
So over the weekend I had some time to try out both and will be doing videos in the future but I thought I would show you a couple of the flourishes I designed in. Inkscape and cut with the ScanNCut.
These were designed at about 10 inches wide but I reduced them to about 6 inches wide once I had the design on the machine, see how very thin some of the sections are and the ScanNCut, cut them perfectly.