top of page

Welcome To My Blog

So this is not my idea but I thought it was a good one.

Cut some simple shapes either by hand or I used SNC and basic shapes cut at 4inch high.

Lay on top of some felt slightly bigger add a piece of ribbon or jute twine in-between the two layers and stitch in place, then carry on working your way down the shape using decorative stitches from your machine.

I also used a blanket stitch around the outside edge, then I cut the felt away around the shape. On the oval shape one I trimmed close to the stitches but on the triangle I left about 2mm of felt showing I think I prefer it that way.

These could be made really big and hung on a craft room wall for Christmas too.

 
 

In this video I show how easy and quick it is to change this machine from ordinary sewing into an embroidery machine.

The project I embroidered is this. I wanted a mat to go under my SNC machine on my desk so I used an inbuilt quilt pattern and made this, it will be a project on my channel soon.

The video is Here

 
 
Applelover53 2018©
bottom of page