So I saw this on Pinterest and thought I would have a go this morning.
Here is the link to the original tutorial, you do not need a ScanNCut for this but if you have one you can get it to do all the felt cutting for you.
I made my shapes smaller as the only canvas I could get was A4 in size, I think the one in the tutorial is 12×12.
I made the shape in ScanNCut Canvas and made three different sizes and cut them all out of 2, 12×12 pieces of felt which I backed with HeatNBond.
My shapes were 3.75, 3.0 and 2.25 inches high.
I used blade7, cut pressure9 and speed5.
Covered a canvas with cotton fabric and used a hot glue gun to set all the felt pieces in place.
I think it turned out nice.
